This study presents a data-driven analysis of electric powertrain energy flow and traction battery behavior in a modern battery electric vehicle based on real-world on-board diagnostic (OBD) measurements. Time-resolved signals acquired during an urban trip by a Renault 5 E-Tech Electric were processed to reconstruct instantaneous energy exchange between the traction system and the battery, identify distinct operating regimes, and derive physically interpretable empirical models of selected drivetrain relationships. The analysis focused on the traction power, battery current, battery voltage, state of charge, accelerator pedal position, and cell voltage imbalance. The recorded data were decomposed into propulsion, regenerative, and auxiliary-load-dominated operating regimes, which improved the interpretability of the measured signals and the quality of the regression-based models. A second-order model was used to describe the relationship between traction power and accelerator pedal position, while a linear current-voltage model provided a locally accurate approximation of battery electrical behavior. In addition, the dependence of the cell voltage imbalance on the battery current was analyzed as a diagnostic indicator of load-dependent battery response. The results show that auxiliary loads, especially cabin and battery heating under winter conditions, introduce a significant baseline power demand that affects the apparent drivetrain response. Within the analyzed single-trip dataset, the recorded battery signals showed a low cell-voltage imbalance and a consistent local current–voltage trend over the observed operating range. These findings should be interpreted as preliminary and vehicle-specific, since they were obtained from one short winter urban trip and from a restricted set of OBD-accessible signals. Although the study is limited to a single vehicle and a single short trip, it demonstrates that accessible real-world OBD data can support physically interpretable, exploratory analysis of electric powertrain operation and battery response under practical measurement constraints.
Caban et al. (Sat,) studied this question.