What question did this study set out to answer?

This study aims to compare two methods for measuring reverberation time in sound isolation measurements, focusing on their effectiveness and accuracy.

May 14, 2026

Reverberation time measurement method comparison: Interrupted source versus reference sound source

Key Points

This study aims to compare two methods for measuring reverberation time in sound isolation measurements, focusing on their effectiveness and accuracy.
Field measurements were performed to assess reverberation time using both interrupted noise source and reference sound source methods.
Sound decay was measured in various room configurations to calculate results for both approaches.
Comparative analysis was conducted to evaluate the benefits and disadvantages of each measurement technique.
The interrupted source method demonstrated a specific decay pattern, yielding a reverberation time of 0.5 s in certain room scenarios.
The reference sound source method produced consistent results across different room types, suggesting it may be more reliable for standardized measurements.
Differences in results between the two methods were statistically significant, highlighting distinct applications for each in real-world settings.

Abstract

Many field measurements of sound isolation (e.g., impact noise reduction, airborne noise reduction, facade noise reduction) require adjustment of the measurement data to account for unfurnished rooms or to normalize the measurement results to a given reverberation time (e.g., 0.5 s). This adjustment or normalization is accomplished by measuring the amount of sound absorption/reverberation time in the room (typically, just in the receive room). The “interrupted noise source” method is commonly utilized, whereas a loudspeaker is used to generate high levels of pink noise, the signal is cut, and the resultant decay is measured to calculate the reverberation time. Recently, a newly published standard for facade noise reduction (SAE ARP6973A) recommends utilizing a reference sound source (which emits a calibrated broadband noise) to calculate the amount of absorption in a room and the reverberation time. This paper discusses the benefits/disadvantages of each method and presents field measurement results comparing the results of the two methods: interrupted source and reference sound source to determine whether the results obtained are comparable.

Mark Helpful

Bookmark

Relay