To meet the demand for high-range and high-frequency impact acceleration measurements, a fiber Bragg grating (FBG) accelerometer with a double-sided symmetrical inclined cantilever beam structure is proposed. The sensing principle is analyzed based on inertial and FBG sensing theories, and theoretical models for sensitivity and resonant frequency are derived. Using PPA-CF material and parameter optimization, the structural dimensions of the cantilever beam, effective fiber length, and proof mass are determined through numerical simulation. Finite element modal analysis shows a first-order natural frequency of 1284 Hz, with the dominant mode being axial translation of the mass block, ensuring pure axial strain on the FBG. A drop-weight impact calibration system is established for experimental testing. Results demonstrate that the sensor achieves a resonant frequency exceeding 1333 Hz, a measurement range above 500 g, and a practical sensitivity of approximately 1.183 pm/g. The linear response exhibits a coefficient of determination, R2, of 0.9875, confirming excellent linearity. The proposed accelerometer effectively balances high-frequency response and measurement accuracy, providing a reliable solution for high-frequency impact monitoring in aerospace and impact dynamics applications.
Tian et al. (Thu,) studied this question.