Key points are not available for this paper at this time.
In the nuclear power plant industry, Cr-Mo ferritic steels are indispensable due to their high-temperature tensile strength, creep strength, and resistance to stress corrosion cracking. This study evaluated and analyzed the mechanical properties and metallurgical behavior of indigenously developed filler (over matched with base metal) manual metal arc welded Cr-Mo ferritic steel (hereafter referred as P91 steel). The analysis revealed that the ultimate tensile properties of the weld joint exceed those of the unwelded metal, being 6% higher than the base metal. Consequently, the joint efficiency for the weld joint is 106%. However, the impact toughness of the weld pad is significantly lower compared to the unwelded metal, nearly 2.5 times less than the base metal. The weld metal region’s microstructure is characterized by untempered lath martensite pinned with dense dislocations, which is attributed to rapid cooling from the liquidus range. Furthermore, a distinct Heat-Affected Zone (HAZ) was identified adjacent to the weld metal region, which results from the elevated temperature experienced in this area.
Karthick et al. (Sun,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: