Key points are not available for this paper at this time.
The development of a portable, low-cost sensor capable of accurately detecting H2S gas in exhaled human breath at room temperature is highly anticipated in the fields of human health assessment and food spoilage evaluation. However, achieving outstanding gas sensing performance and applicability for flexible room-temperature operation with parts per billion H2S gas sensors still poses technical challenges. To address this issue, this study involves the in situ growth of MoS2 nanosheets on the surface of In2O3 fibers to construct a p–n heterojunction. The In2O3@MoS2-2 sensor exhibits a high response of 460.61 to 50 ppm of H2S gas at room temperature, which is 19.5 times higher than that of the pure In2O3 sensor and 322.1 times higher than that of pure MoS2. The In2O3@MoS2-2 also demonstrates a minimum detection limit of 3 ppb and maintains a stable response to H2S gas even after being bent 50 times at a 60° angle. These exceptional gas sensing properties are attributed to the increase in oxygen vacancies and chemisorbed oxygen on In2O3@MoS2-2 nanofibers as well as the formation of the p–n heterojunction, which modulates the heterojunction barrier. Furthermore, in this study, we successfully applied the In2O3@MoS2-2 sensor for oral disease and detection of food spoilage conditions, thereby providing new design insights for the development of portable exhaled gas sensors and gas sensors for evaluating food spoilage conditions at room temperature.
Huo et al. (Thu,) studied this question.