Key points are not available for this paper at this time.
In this paper, a secure orthogonal time-frequency space (OTFS) modulation transmission system based on 3D dense constellation mapping (DCM) geometric shaping is proposed, and a selective reduction amplitude algorithm (SRA) for DCM to reduce peak average power ratio (PAPR) is presented. The DCM is based on regular tetrahedron construction to improve its space utilization efficiency. The proposed SRA involves reducing high PAPRs transmitter and restoring them at the receiving end, which only requires an additional 0.57% of the total transmission capacity. The algorithm reduces PAPR while ensuring the bit error rate performance of the system, so it is suitable for systems that need to process large amounts of transmitted data quickly. By verifying the actual transmission performance on a 2 km of 7-core optical fiber transmission system, the optical transmission with a bit rate of 33.93Gb/s is achieved. The experimental results show that when the bit error rate (BER) reaches the 3.8×10 −3 threshold, the OTFS system using DCM and SRA could improve the receiver sensitivity by 3.7 dB compared with the OTFS system using concentric cube mapping and SRA, and 2.7 dB compared with the OFDM system using DCM. After adding the SRA, the PAPR of the OTFS system is reduced by more than 2.2 dB. When the received optical power reaches near the bit error rate threshold, the SRA valid data can be fully recovered by optimizing the SRA.
Deng et al. (Wed,) studied this question.