Key points are not available for this paper at this time.
Characterizing changes in rock properties is essential for the hydraulic fracture and re-fracture parameter optimization of shale formations. This paper proposed a hydraulic fracturing model to investigate the changes in rock properties during hydraulic fracturing using SPH, and the changes in the stress field and rock properties were quantitatively characterized. The simulation results indicated that the minimum horizontal principal stress increased by 10 MPa~15 MPa during fracture propagation, which is the main reason for the uneven propagation in multi-fracture propagation. Affected by the stress disturbance, the stimulated area was divided into four parts based on the changes in Young’s modulus and permeability; the more seriously the stress disturbance was affected, the higher the permeability of the stimulated zone was, and the smaller the stimulated zone was. Meanwhile, a zone with reduced permeability appeared due to the compression effect caused by the high injection pressure, and this increased with the increase in stress disturbance. The main reason for this was that strain formed because of the compression effect from the high injection pressure. The higher the stress disturbance, the higher the accumulated strain. This new model provides a new method for fracture parameter optimization, which also provides a foundation for the re-fracture parameter optimization of shale formations.
Zhu et al. (Sat,) studied this question.