Key points are not available for this paper at this time.
A smooth flat plate impinged by multiple jets is investigated for the local heat transfer using a thermal imaging technique. An inline arrangement of circular jets with all side exit scheme is implemented. Jets are introduced from a 4 mm thick orifice plate. The jet diameter is 3 mm. Reynolds numbers (based on the jet diameter) range covered in this study are from 500 to 15,000. The variation of the local, spanwise average, and overall average Nusselt numbers is investigated for nozzle exit to targeted plate spacing of 0.5 d–6 d, where d is the jet diameter. A periodic pattern is witnessed in the local Nusselt number with a drop in its amplitude in the spanwise direction. For a given Reynolds number, the local and average Nusselt numbers are influenced by nozzle exit to targeted plate spacing. The influence of Reynolds number on the local and average Nusselt number is captured using Ren. The value of n is found to be 0.5 and 0.6 depending on the Reynolds number range. In comparison with a single jet, multiple jet impingement on a smooth flat plate deteriorates the local Nusselt number. A semi-empirical correlation that captures the periodic nature of local and average Nusselt numbers is suggested.
Yogi et al. (Thu,) studied this question.