Key points are not available for this paper at this time.
High temperature superconducting (HTS) tapes of the second generation have been widely used as energy storage materials, such as in superconducting magnetic energy storage (SMES) devices. In order to enhance the current-carrying characteristics, these systems are typically run close to the critical currents of the coated conductors; as a result, hot spots may develop, which could cause the superconductor to become quenched. In order to prevent the start of hot spots and to reduce the amount of faulting, efforts have been made to raise the normal zone propagation velocity (NZPV) in this manuscript. The interfacial resistance between the superconductor and stabilizer layer, which can act as a current flow diverter during fault circumstances, has been shown to be the key to producing massive NZPV. The tape's architecture has been slightly modified by the addition of a high resistive layer between the superconducting and stabiliser layers, where various interfacial resistances have been utilised to forecast the temperature distribution between 10 cm lengths of HTS tape. A 2D numerical model was created using COMSOL to assess the NZPV and temperature distribution of the 2G superconducting tape. It has been concluded that larger NZPVs can be achieved by using substantial interfacial resistances to prevent superconducting tape quenching.
- et al. (Thu,) studied this question.