Silicone-based highly stretchable multifunctional fiber pumps

Recent advancements on electrohydrodynamic (EHD) soft pumps demonstrate their applicability to various fluid-driven systems such as soft robots, wearable devices, and stretchable electronics. In particular, fiber type EHD pumps reported more recently is a promising pumping element thanks to their versatile fibrous structure. Yet existing EHD fiber pumps are less stretchable and require sophisticated, complex fabrication equipment, implying opportunity for technology advancement. This paper presents a simplified method to create highly stretchable multifunctional fiber EHD pumps. The method employs highly compliant silicone elastomers for the fiber structure that is formed by simple dipping fabrication process. The fabricated pumps (length of 100 mm, inner diameter 4 mm, and mass 5.3 g) exhibit a high stretchability (up to 40% strain) and flow rate and pressure of 167.4 ± 7.6 mL/min (31.6 mL/min/g) and 4.1 ± 0.6 kPa (0.8 kPa/g), respectively. These performances are comparable or even higher than those of previously reported EHD pumps including fiber types. The output performance of the fabricated pumps remain constant for repeated strain cycles (0-25%, up to 2000 cycles) and bending angle up to 180° (corresponding to curvature of 0-30/m). Moreover, the pumps demonstrate unprecedented functionality as a sensor to distinguish the type of fluid inside the tube and to detect strains by reading the capacitance between the electrodes. The characterization result reveals the sensing ability of the pumps as high repeatability up to 30% strain with negligible hysteresis, which is consistent for 5000 cycles.