CCAT: Mod-Cam Readout Overview and Flexible Stripline Performance

The CCAT Observatory's first-light and commissioning instrument, Mod-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope (FYST) in the Atacama Desert in northern Chile. In-lab testing of Mod-Cam and the first CCAT instrument module, a 280 GHz broadband camera fielding over 10,000 kinetic inductance detectors (KIDs), is currently underway. CCAT's first-generation science instrument, Prime-Cam, will field approximately 100,000 KIDs across seven instrument modules. Like Mod-Cam, it employs 46 cm long low-thermal-conductivity flexible circuits ("stripline") between 4 K and 300 K to connect large arrays of multiplexed detectors in each instrument module to readout electronics. The 280 GHz camera currently installed in Mod-Cam uses six striplines to read out its over 10,000 detectors across 18 RF chains, each individual stripline containing six traces. In-lab testing thus far has allowed us to begin optimizing the attenuation in the readout chains for each of the three detector arrays in the 280 GHz module and demonstrate simultaneous readout of all networks using CCAT's RFSoC warm readout electronics. Here we present an overview of the Mod-Cam cold readout and discuss the stripline performance by investigating how its thermal conductivity impacts Mod-Cam and Prime-Cam cryogenic performance. We also report on stripline electrical transmission and crosstalk, identifying transition printed circuit boards (PCBs) as the dominant source of crosstalk. Using this result we outline design improvements to these PCBs that enhance isolation between readout networks.