The competitive adsorption of two model herbicides, 2,4-dichlorophenoxyacetic acid (2,4-D) and 4-chloro-2-methylphenoxyacetic acid (MCPA), onto Activated Carbons (ACs) derived from pomegranate peels through chemical activation with phosphoric acid (H3PO4) was investigated in fixed-bed column mode. The prepared activated carbon (AC-PA) exhibited a high apparent surface area (up to 1409 m2/g) and a predominantly microporous structure. Morphological and chemical analyses (micrographic observation, X-ray difraction, N2 adsorption–desorption) confirmed the presence of well-developed pore networks and surface oxygenated functionalities. Column adsorption experiments were performed under varying flow rates (0.25–3 mL/min) for both single and binary solutions. The breakthrough data were modeled using the Thomas and Yoon–Nelson equations, achieving high determination coefficients (R2 = 0.91–0.99). Lower flow rates favored higher adsorption capacities, reaching 193.61 mg/g for 2,4-D at 0.25 mL/min. Under similar conditions (flow rate of 1.5 mL min−1), the AC provided a better adsorption for 2,4-D than for MCPA in single systems, which was attributed to stronger affinity based on its greater hydrophobicity and prominence to dispersive interactions. In binary systems, competitive effects shifted the results and a noticeable roll-up phenomenon was observed for 2,4-D, attributed to its displacement by MCPA along the bed; this made the adsorbent more effective for MCPA in binary mixtures than in single ones. These findings highlight the potential of pomegranate-based activated carbon as a cost-effective and sustainable adsorbent for herbicide removal in continuous water treatment systems.
Guedri et al. (Fri,) studied this question.