Masonry retaining walls constitute an essential component of historic and urban infrastructure in seismic regions; however, their seismic performance remains insufficiently quantified due to material heterogeneity, limited tensile capacity, and complex soil–structure interaction. This study investigates the seismic response of historic stone masonry retaining walls using a finite element-based anisotropic macro-modeling approach. The analysis focuses on the perimeter retaining walls of Emirgan Grove in Istanbul, which represent culturally significant heritage structures constructed from natural limestone and cement–lime mortar. Material properties were defined based on experimental test results and representative values reported in the literature, while composite anisotropic behavior was incorporated into the numerical models. Static loads, earth pressures, and seismic actions were applied in accordance with the Turkish Building Earthquake Code (TBEC-2018) using the equivalent static earthquake load method. Representative wall segments with heights of 2.5 m, 3.5 m, 4.0 m, and 6.30 m were analyzed. The numerical results show that maximum compressive stresses reached approximately 0.48 MPa, remaining well below the allowable limit of 4.50 MPa, while maximum tensile stresses of about 0.28 MPa did not exceed the allowable tensile limit of 1.00 MPa. In contrast, shear stresses locally reached approximately 0.25 MPa, exceeding the allowable shear limit of 0.10 MPa, particularly along the soil–wall interface in taller walls. Sliding stability was satisfied in all cases, whereas overturning and shear behavior governed seismic vulnerability. These findings confirm that wall height is the primary parameter controlling seismic response and demonstrate the effectiveness of the proposed framework for preservation-oriented seismic safety assessment of historic masonry retaining walls.
Öztürk et al. (Wed,) studied this question.