A demountable connection is necessary to enable quick and easy replacement of high-temperature superconducting (HTS) tape samples during cryogenic (77 K) testing, particularly when investigating their application in superconducting fault current limiters (SFCLs). Testing HTS tapes for application in SFCLs involves inducing their transition from the superconducting state to the resistive state, which can result in sample damage. The contact resistance of the HTS tape to the current lead depends on the area and on the uniform pressure. Stress distribution in screwed connections with two, four and six screws was analysed using a solid model to compare them and achieve the uniform contact essential for minimising contact resistance in cryogenic conditions. The analysis indicated a solution that provides the most uniform pressure distribution across the HTS tape surface. This solution was utilised in subsequent calculations of thermal shrinkage, and for the determination of the optimal disc spring stack configuration. It is imperative that the compensating disc springs maintain the requisite pressure of the copper block on the tape across the entire operational temperature range (room to cryogenic). Furthermore, the disc springs must provide adequate stroke to compensate for the thermal shrinkage of a copper block and an aluminium clamp.
J. Kozak (Mon,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: