Microscopic experiments and simulations of CO2 huff-n-puff displacement mechanism considering heterogeneity and fractures

Heterogeneity and fractures significantly influence oil and gas migration. However, current research remains insufficient in clearly visualizing CO 2 displacement mechanisms under such reservoir conditions. This study combines microscopic visualization experiments and numerical simulations to investigate three-phase flow characteristics during CO 2 huff-n-puff, CO 2 displacement, and water huff-n-puff in heterogeneous fractured reservoirs. The research elucidates the formation mechanism of residual oil and the characteristic of CO 2 storage during huff-n-puff, and further illustrates the influences of soaking time and injection pressure. Results indicate that CO 2 huff-n-puff significantly mitigates the adverse effects of heterogeneity. The primary cause of residual oil formation is insufficient displacement energy to overcome various flow resistances. CO 2 primarily exists in pore throats as bubbles and is stored in dissolved form in the oil and water phases. As the soaking time and injection pressure increase, the proportion of continuous residual oil decreases noticeably, leading to a higher oil recovery factor. When the injection pressure exceeds the minimum miscible pressure (MMP), the diffusion coefficient of CO 2 increases significantly. Moreover, the presence of vertical fractures effectively expands the diffusion range of CO 2 . These findings provide a theoretical basis for the applications of carbon dioxide enhanced oil recovery (CO 2 -EOR) and carbon capture, utilization, and storage (CCUS) technologies.