Biaxial creep tests of porcine pericardium demonstrated deformation in the circumferential and radial directions of 3303 × 10−6 and 5192.9 × 10−6, respectively, after 30 minutes.
Biaxial tensile testing of porcine pericardium yields critical viscoelastic parameters for numerical simulations of long-term aortic valve bioprosthesis performance.
To design novel heart valve bioprostheses, it is extremely important to predict leaflet failure and fatigue for 10–20 years, as the aortic valve opens and closes approximately 40 million times per year. Most studies devoted to aortic valve leaflets mechanical tests employ uniaxial or biaxial tests, which do not fully and explicitly describe the time-dependent biomechanical behavior of this tissue. The aim of this study was to evaluate the viscoelastic response of porcine pericardium using biaxial tensile tests. Biaxial creep tests were performed on a biaxial test machine to evaluate the circumferential and axial behavior of the porcine pericardium under creep testing, and biaxial stress relaxation was used to complement creep. The results showed that the creep behavior was the same in both directions after 1 s, 60 s, 300 s, 900 s, and 1800 s. After 30 min of creep, deformation in the circumferential and radial directions was 3303 × 10−6 and 5192.9 × 10−6, respectively. Stress relaxation tests showed the same behavior as creep. At stress relaxation test after 30 min, the pericardium deformation in the circumferential and radial directions was 15.28 kPa and 9.6 kPa, respectively. The Prony series with Levenberg–Marquardt as the optimizer was used to obtain material parameters to use for finite element analysis. The data obtained during such tests can be employed in numerical FSI simulations of novel aortic valve bioprosthesis long-term performance in a patient’s body.
Matjeka et al. (Mon,) conducted a other in Aortic valve bioprosthesis design. Biaxial tensile creep and stress relaxation tests was evaluated on Viscoelastic response (creep and stress relaxation behavior). Biaxial creep tests of porcine pericardium demonstrated deformation in the circumferential and radial directions of 3303 × 10−6 and 5192.9 × 10−6, respectively, after 30 minutes.