Key points are not available for this paper at this time.
Laser keyhole welding of dissimilar metals has broad applications in various industrial fields. However, dissimilar metal mixing in the molten pool often causes the formation of detrimental intermetallic compounds that can undermine the performances of the dissimilar metal joints. In this study, the metal mixing process in laser keyhole welding of dissimilar metals is investigated with a combination of experimental and modeling approaches. The parametric experimental study is conducted to reveal the effects of laser power, welding speed, and heat input on the metal mixing in the fusion zone. Ex-situ energy-dispersive X-ray spectroscopy element mapping is used to characterize the metal mixing status in the fusion zone. To investigate the underlying physics of the welding process, a numerical model is developed to simulate the heat transfer, fluid flow, and metal mixing in the molten pool. It is found that the recoil pressure contributes to an upward flow that pushes copper to migrate from the bottom of the molten pool to the top. Meanwhile, the Marangoni force generates one backward flow and two side vortices that facilitate the metal mixing. An increase of laser power increases both the recoil pressure and the Marangoni stress, which drives more copper to migrate upward and mix with aluminum. An increase of welding speed reduces the molten pool lifetime, which reduces the metal mixing by the fluid flow. The investigation of dissimilar metal redistribution provides insights regarding the formation of intermetallic compounds in the joints, which is valuable for the design and optimization of the welding process in different industries.
Huang et al. (Thu,) studied this question.