Key points are not available for this paper at this time.
Heat and mass transfer study of hybrid nanomaterial Casson fluid with time-dependent flow over a vertical Riga sheet was deliberated under the stagnation region. In the presence of the Riga sheet in fluid flow models, this formulation was utilized to introduce Lorentz forces into the system. We considered the three models of hybrid nanomaterial fluid flow: namely, Yamada Ota, Tiwari Das, and Xue models. Two different nanoparticles, namely, SWCNT and MWCNT under base fluid (water) were studied. Under the flow suppositions, a mathematical model was settled using boundary layer approximations in terms of PDEs (partial differential equations). The system of PDEs (partial differential equations) was reduced into ODEs (ordinary differential equations) after applying suitable transformations. The reduced system, in terms of ODEs (ordinary differential equations), was solved by a numerical scheme, namely, the bvp4c method. The inspiration of the physical parameters is presented through graphs and tables. The curves of the velocity function deteriorated due to higher values of M. The Hartmann number is a ratio of electric force to viscous force. The electric forces increased due to higher values of the modified Hartmann number, ultimately declining the velocity function. The skin friction was reduced due to an incremental in ϖ, while the Nusselt number raised with higher values of ϖ. Physically, the Eckert number increased, which improved kinetic energy and, as a result, skin friction declined. The heat transfer rate increased as kinetic energy increased, and the Eckert number increased. The skin friction reduced due to physical enhancement of β1, the shear thinning was enhanced which reduced the skin friction.
Shatnawi et al. (Fri,) studied this question.