Cortical and medullary morphology of the tibia

Bone resorption caused by stress shielding and insufficient bone-implant contact continues to be problematic for orthopedic endoprostheses that utilize osseointegration (OI) for skeletal fixation. Morphologic analyses have helped combat this issue by defining anatomic parameters to optimize endoprosthesis loading by maximizing bone-implant contact. These studies have not typically included diaphyseal medullary morphology, as this region is not pertinent to total joint replacement. To the contrary, percutaneous OI endoprostheses for prosthetic limb attachment are placed in the diaphysis of the long bone. This study examined the cortical and medullary morphology of 116 fresh-frozen human cadaveric tibia using computed tomography. Anatomic landmarks were selected and custom MATLAB scripts were used to analyze the cross-sectional cortical and medullary morphology normalized to biomechanical length (BML). BML measured the distance between the tibial plateau and the tibial plafond. Properties such as cortical thickness, medullary diameter, and circularity of the medullary canal were quantified. We tested the influence of sex and laterality on morphology, and examined variations along the length of the bone. Results showed that while both sex and laterality impacted the location of anatomic landmarks, only sex influenced cross-sectional morphology. Overall, morphology significantly affected shape along the length of the bone for all examined properties except medullary circularity. This analysis found that distal to 35% BML, the canal is conducive to a circular implant, with medullary diameter ranging from 13 to 32 mm between 20 and 80% BML. A large size range is necessary for sufficient implant contact in order to accommodate residual limb length after amputation.