Hydrogen internal combustion engines offer a promising pathway to low-carbon propulsion. For cost-effective port-fuel-injection hydrogen engines, intake hydrogen must be properly managed to improve in-cylinder mixing and minimize residual hydrogen to avoid backfire. This work evaluates a novel guide tube injector concept on a 5.1-L heavy-duty hydrogen engine. Three-dimensional simulations are performed to quantify the effects of guide tube geometry and injection timing on hydrogen transport, mixture formation, and residual hydrogen. The Taguchi design and TOPSIS are applied to assess factor influence and robustness. Results show that the guide tube significantly lowers residual hydrogen. The end of injection(EOI) should be no later than 90°CA before intake valve closing. Using the TOPSIS method, the effects of injection parameters on the optimization objectives are systematically evaluated, and the optimal combination is identified as a 20 mm guide tube length, a 10° guide tube angle, and an EOI of −277°CA. • An active jet−guidance strategy using a guide tube is proposed for PFI H2ICE. • End−of−injection timing dominates hydrogen residual mass in the intake port. • Guide tube angle is the primary factor governing mixture uniformity. • Robust optimal parameters are identified for residual minimization and uniformity maximization.
Yin et al. (Mon,) studied this question.