Key points are not available for this paper at this time.
This paper proposes a novel stochastic planning model for AC-DC hybrid distribution systems (DSs). Taking into account the possibility of each line/bus being AC or DC, the model finds the optimal AC-DC hybrid configuration of buses and lines in the DS. It incorporates consideration of the stochastic behavior of load demands and renewable-based distributed generators (DGs). The stochastic variations are addressed using a Monte-Carlo simulation technique. The objective of the planning model is the minimization of DS installation and operation costs. The optimal planning solution is obtained by dividing the hybrid planning problem into two nested optimization problems: 1) the main problem is formulated using a genetic algorithm (GA) to search for the optimal AC-DC configuration and 2) the subproblem is used for determining the optimal power flow solution for each configuration generated by the GA. The proposed model has been employed for finding the optimal configuration for a suggested case study that included photovoltaic panels, wind-based DG, and electric vehicle charging stations. The same case study was also solved using a traditional AC planning technique in order to evaluate the effectiveness of the proposed model and the associated cost-savings. The results demonstrate the advantages offered by the proposed model. The proposed framework represents an effective technique that can be used by DS operators to identify the optimal AC-DC network configuration of future DSs.
Ahmed et al. (Fri,) studied this question.