Key points are not available for this paper at this time.
The pavement surface temperatures in Iraq are remarkably high, causing the asphalt to deteriorate quickly, shortening its service life. While a large amount of corn husk, an agricultural waste, is available for use as an asphalt modifier, researchers have not yet fully investigated this option. In this study, the use of corn husk fiber powder (CHFP) as a long-term modifier for asphalt binders and mixtures that are exposed to high-temperature conditions is evaluated. CHFP was mixed into a 40–50 penetration grade asphalt binder at concentrations ranging from 0.0% to 0.6% by weight. Performance was assessed using laboratory tests such as penetration, softening point, rotating viscosity, dynamic shear rheometer (DSR), aging (RTFOT and PAV), and wheel tracking. The findings revealed that CHFP greatly lowers penetration while increasing the softening point, indicating increased stiffness and high-temperature stability. Rheological research showed an increase in the rutting parameter (G*/sinδ) and viscosity, as well as reduced temperature susceptibility. At the mixed level, CHFP reduced rut depth while improving dynamic stability, indicating increased resistance to permanent deformation. The best performance was obtained at 0.3% CHFP, after which, improvements decreased due to probable dispersion constraints. The performance improvement is related to the creation of a reinforcing fiber network and the absorption of light asphalt components. Overall, CHFP is a promising, environmentally friendly and cost-effective addition for increasing asphalt pavement performance and promoting sustainable waste management.
Jasim et al. (Thu,) studied this question.