Key points are not available for this paper at this time.
The authors assessed the performance of an automatic and rapid coronary quantification method by evaluating its accuracy in a stenosis phantom. Measurements were obtained with a lucite phantom with 2-, 3-, and 4-mm vessel diameters and concentric stenoses of 33%, 50%, 67%, and 75%. Direct digital angiographic images as well as 10 X 10 spot films and 35-mm cine angiography films were acquired with and without structural noise and mask subtraction. The films were digitized with magnification factors of one and two. An interactive analysis program was used to automatically determine the vessel edges with a Gaussian fit to the cross-sectional density profiles perpendicular to the center line of the vessel. Relative changes of the densitometric cross-sectional area along the vessel were used to assess the percentage of stenosis. Densitometric measurements were comparable in both digital and cine angiograms (r = .99 and r = .98, respectively); however, diameter measurements showed a higher variability and were dependent on the amount of magnification applied to the images.
Ratib et al. (Wed,) studied this question.