Key points are not available for this paper at this time.
Purpose The aim of this paper is to create a sensor that can measure the contact status with high‐resolution than ever. Design/methodology/approach This paper proposes a new type of optical tactile sensor that can detect surface deformation with high precision by using the principle of optical lever. A tactile sensor is constructed that utilizes the resolution of a camera to the maximum by using transparent silicone rubber as a deformable mirror surface and taking advantage of the reflection image. Findings It has been found that the sensor can sense the deformation by the object with 1 percent error rate in simulation. In implementation of this time, the error rate results 10 percent. Research limitations/implications This sensor can be used with broad applications by combining with other devices. As one of future work, the zero method will be used by using active patterns and get more accurate information. Practical implications Using the transparent silicone rubbers the sensor enables very simple and low cost and high‐resolution detection method. In addition, the simplicity of our sensor results various applications. For example, the transparency makes the sensor a light pathway, so the sensor can be a contactless sensor or an interactive device. Originality/value The concept of a tactile sensing method is introduced which can utilize the resolution of a camera to the maximum possible extent and can detect surface deformation by using the principle of optical lever.
Saga et al. (Tue,) studied this question.