The production of high-purity hydrogen from chemical hydrogen storage materials such as sodium borohydride (NaBH4) has been identified as a particularly promising candidate due to its high hydrogen storage capacity and environmentally benign hydrolysis products. The incorporation of tungsten (W), thereby developing W-promoted NiMo catalytic systems, results in the enhance activity toward NaBH4 hydrolysis, thereby developing ternary NiMoW catalytic systems. The synthesis of NiMoW-coated copper catalysts (NiMoW/Cu) containing 3–11 wt.% of W was accomplished using a cost-effective and efficient electroless deposition method from citrate-based plating baths containing Ni2+, Mo6+, and W6+ ions. Morpholine borane was utilized as the reducing agent in this process. The catalytic activity of the prepared coatings toward alkaline NaBH4 hydrolysis increased as the tungsten content decreased within the investigated range of 3–11 wt.%. The highest hydrogen generation rate, reaching 9.87 L min−1 gcat−1, was achieved using the NiMoW/Cu catalyst containing 3 wt.% of W at 343 K. The corresponding apparent activation energy was calculated to be 52 kJ mol−1. In addition, the catalyst demonstrated notable 89.1% stability, maintaining a high degree of catalytic activity after undergoing five successive hydrolysis cycles. The enhanced catalytic performance was attributed to synergistic interactions between Ni, Mo, and W and to the favorable surface morphology of the multicomponent coating, which promoted the hydrogen generation reaction.
Valeckytė et al. (Thu,) studied this question.