Research on the WEDM process has traditionally focused on analyzing discharge initiation, material removal mechanisms and surface formation from the perspective of the machined part. However, the same phenomena also affect the tool, namely the wire electrode. A comprehensive understanding of the process requires to examine how these effects impact the electrode itself, particularly in terms of wear. Despite its significance, electrode wear in WEDM is not a topic frequently addressed in the literature. The most common method for evaluating wear involves determining the wire wear ratio (WWR), based on the electrode’s weight before and after machining. However, this approach does not provide insight into changes in the microstructure of the electrode surface. This study presents an alternative approach to interpreting wire electrode wear, using surface roughness parameters in relation to the surface texture of the machined workpiece. Measurements were conducted using an optical focus variation microscope. The influence of selected process parameters—including discharge current Ip, pulse-off time toff and workpiece height h—on selected surface roughness parameters was investigated. The experimental tests were carried out for three alloys representing distinct material groups: 42CrMo4 steel, Inconel 718 nickel alloy, and Ti6Al4V titanium alloy. The results were compared with the roughness parameters of the corresponding machined surfaces. The presented interpretation of the key factors affecting the electrode surface condition after WEDM serves as an initial step in a broader research initiative. It lays the foundation for further studies on wire electrode wear and the development of new wear assessment parameters such as the electrode wear index based on surface texture parameters.
Buk et al. (2025) studied this question.