Key points are not available for this paper at this time.
The high- and low-pressure switching of the axial piston pump is realized by the structure of the valve plate, and the buffer-groove structure on the valve plate is very important to reduce the pressure shock and flow fluctuation. In order to optimize the structural parameters of the buffer tank of the piston pump, the influence of the triangular-groove structure on the outlet pressure–flow characteristics was analyzed, and the low-pulsation buffer-groove structure was designed. First, the relationship between the structure of the triangular buffer tank and the output pressure and flow characteristics of the pump was analyzed theoretically. The Computational Fluid Dynamics (CFD) method was used to calculate the pressure and flow characteristics of the whole pump flow field of the triangular-groove structure, and the influence of the buffer-groove structure parameters on the outlet flow pulsation characteristics was studied. The multi-objective optimization algorithm was used to optimize the structure parameters of the buffer tank, and the optimized structure significantly reduced the outlet pressure–flow pulsation of the piston pump. The results show that, after optimization, the width angle of the front and rear triangular groove is 82.3°, the depth angle is 12.7°, the optimized pressure pulsation rate is 0.3%, and the optimized flow pulsation rate is 13.7%.
Dian et al. (2024) studied this question.