PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
May 9, 2024Scientific Reports20 citationsOpen Access

Immature characteristics of the East Anatolian Fault Zone from SAR, GNSS and strong motion data of the 2023 Türkiye–Syria earthquake doublet

View Full Paper
JLJiao LiuCHChuanchao HuangGZGuohong Zhang

Key Points

Key points are not available for this paper at this time.

Abstract

On February 6, 2023, an Mw 7.9 earthquake occurred in the western section of the East Anatolia Fault Zone (EAFZ). It was subsequently followed by an Mw 7.7 earthquake on the northern branch of the EAFZ, known as the Sürgü Fault Zone. Coseismic deformation fields were derived for these earthquakes using joint evaluation of near-field strong motion data, Global Navigation Satellite System data, and Synthetic Aperture Radar datasets. The coseismic slip distribution model was determined through the joint kinematic finite fault inversion. The Mw 7.9 earthquake was a left-lateral strike-slip event, predominantly occurring at depths up to 20 km. The earthquake displayed three distinct asperities that correlate well with bends and stepovers along the EAFZ. The Mw 7.7 earthquake also exhibited left-lateral strike-slip characteristics, with a major asperity along the Çardak Fault featuring a maximum slip of approximately 9.5 m at depths between 0 and 24 km. The occurrence of this unanticipated large Mw 7.9 catastrophic seismic event on a fault with low-intermediate structural maturity is noteworthy. In the vicinity of immature faults with multiple jogs, stress tends to accumulate at barrier locations. When the accumulated stress near several adjacent barriers reaches a certain threshold, it may result in the transformation of multiple barriers into asperities, triggering cascading ruptures.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Liu et al. (2024) studied this question.

synapsesocial.com/papers/68e6ad90b6db64358762f3ffhttps://doi.org/10.1038/s41598-024-61326-6
Ask AI
Helpful
Bookmark
Share
View Full Paper