Key points are not available for this paper at this time.
Abstract Gas-fuel HVOF for thermal spraying of WC-CoCr powder is widely known and well described in literature. Focus are the various influencing factors like fuel-to-oxygen ratio, standoff-distance and powder feed rate on the coating characteristics like hardness and porosity. However, the total gas flow is usually not being described in this context despite its wide influence on particle characteristics and therefore on coating properties. In this study, the characteristic influence of the total gas flow on roughness, hardness and porosity is described as well as its effect on the particle characteristics. The study performed was based on technical standard values for thermally spraying WC-Co-Cr via gas-fuel HVOF (DJ2700 hybrid) and additional trials for increased and decreased total gas flow. It was possible to determine that with higher gas flow the deposition rate increases while the roughness and porosity decrease. However, these results cannot be viewed in isolation as other factors, such as the fuel-to-oxygen ratio, are affecting the particle and coating characteristics at the same time. Therefore, the total gas flow is also considered in combination with other factors.
Hambrock et al. (2024) studied this question.