PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
December 4, 2025ACS Applied Bio Materials1 citations

Optimized Inductive Heating of a Superparamagnetic Zn x Mn 1–x Fe 2 O 4 Hydrophilic Magneto-viscoelastic Fluid for Hyperthermia Application

View Full Paper
BRBandla Siva Rama Koteswara RaoMPMihir Ranjan Padhan

Key Points

  • Magnetic fluid hyperthermia achieved superior specific absorption rate due to optimized material properties.
  • The maximum specific absorption rate recorded was 273.4 W/g with biocompatibility remaining high at 95-70% viability in HeLa cells.
  • Inductive heating efficiency was tested using PEG-400-coated superparamagnetic nanoparticles in various conditions.
  • Enhanced zeta potential indicates improved colloidal stability, important for effective hyperthermia applications.

Abstract

This article presents the synthesis and comprehensive investigation of the static and dynamic magnetization properties of large-scale PEG-400-coated superparamagnetic ZnxMn1-xFe2O4 (0 ≤ × ≤ 0.8) nanoparticles, highlighting their potential use as magnetic carriers in magnetic fluid hyperthermia (MFH). The Rietveld analysis of the X-ray diffraction spectra confirmed that the surface-functionalized core nanoparticles exhibit a single-phase spinel structure at the nanoscale, ranging from 15.4 to 11.2 nm. The use of PEG-400 as a hydrophilic shell over Mn-Zn ferrite enhances colloidal stability, as evidenced by the elevated zeta potential (ζ) values ranging from -40 to -26 mV. This enhancement reflects an increase in electrostatic repulsion among ZnxMn1-xFe2O4 nanoparticles, making them well-suited for formulating viscoelastic and water-based magnetic fluids for hyperthermia applications. The AC inductive heating efficiency for magnetic hyperthermia was systematically investigated as a function of particle concentration, applied alternating magnetic field (AMF), and radiofrequency. To optimize hyperthermic performance, AMF strengths of 9.5 kA/m, 18.3 kA/m, and 25.4 kA/m were applied at corresponding constant frequencies of 586.4 kHz, 154.8 kHz, and 103 kHz, using nanoparticle concentrations of 3 and 6 mg/mL. The optimal heating performance, with maximum specific absorption rate and intrinsic loss power (ILP) values of 273.4 W/g and 5.271 nHm2/kg, respectively, was achieved at 18.3 kA/m and 154.8 kHz for a 3 mg/mL concentration, which was comparable to clinically approved magnetic hyperthermia fluids (ILP range: 0.15-3.1 nHm2/kg). At the highest tested frequency (586.4 kHz), the system deviated from linear response theory, further enhancing heating efficiency due to nonlinear Brownian and Neel relaxation processes. The ZnxMn1-xFe2O4 MNPs exhibit good biocompatibility (95-70% cell viability) with tested concentrations of 50, 100, 250, 500, and 1000 μM over HeLa cell lines.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Rao et al. (2025) studied this question.

synapsesocial.com/papers/6930dc6bea1aef094cca1ff0https://doi.org/10.1021/acsabm.5c01685
Ask AI
Helpful
Bookmark
Share
View Full Paper

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Enhanced magnetic domain relaxation frequency and low power losses in Zn2+ substituted manganese ferrites potential for high frequency applications2016 · 64 citations
  2. 2Controlled surface/interface structure and spin enabled superior properties and biocompatibility of cobalt ferrite nanoparticles2018 · 40 citations
  3. 3Efficacy and safety of intratumoral thermotherapy using magnetic iron-oxide nanoparticles combined with external beam radiotherapy on patients with recurrent glioblastoma multiforme2010 · 1,407 citations
  4. 4Effect of zinc substitution on Co–Zn and Mn–Zn ferrite nanoparticles prepared by co-precipitation2004 · 320 citations
  5. 5Field and Temperature Shaping for Microwave Hyperthermia: Recent Treatment Planning Tools to Enhance SAR-Based Procedures2023 · 12 citations