Background: Occupational exposure to aerosol particles can pose a substantial health risk. The study aimed to characterise the deposition of occupationally relevant aerosols in a 3D anatomical adult nasal cavity model under steady and unsteady flows. Materials: The deposition of aerosolised wheat flour, pine wood sanding dust, carbon black, and Arizona Test Dust A3 was quantified under steady flows (5, 7.5, and 20 L/min per nostril) and an unsteady breathing pattern generated by the commercial breathing simulator. Image analysis with custom software quantified the area covered by deposited particles. The Downstream Penetration Index (DPI) was determined from the outlet mass. Results: The highest segmental deposition occurred in the anterior segment of the lateral wall (WA) and septum (SA), with moderate values in the middle lateral wall (WM) and the lowest in the posterior lateral wall (WP, nasopharynx) and septum (SP). Arizona Test Dust A3 and carbon black demonstrated higher middle-posterior deposition and DPI, consistent with finer particle size distributions (PSD) and greater sub-10 µm fractions. In contrast, wheat flour and pine wood dust, with larger median particle sizes and lower sub-10 µm fractions, showed stronger anterior filtration and lower DPI. Increased flow enhanced anterior filtration of coarse particles and shifted deposition forward, aligning with increased inertial impaction, but elevated DPI for fine particles. Under unsteady flow, deposition was intermediate between 7.5 and 20 L/min. Conclusions: This study shows that PSD, morphology, and flow conditions influence nasal deposition. Coarse aerosols were filtered in the anterior nose, while fine-rich aerosols showed relatively greater middle-posterior deposition and higher DPI. These findings are essential for assessing occupational exposure and developing interventions and prevention strategies.
Rapiejko et al. (2026) studied this question.