This study investigates the processability and performance limits of high-density polyethylene (HDPE) recovered from mixed polyolefin waste under realistic mechanical recycling conditions. The waste stream was processed by extrusion and injection molding, with parameters actively adapted. ATR-FTIR and DSC analysis confirmed HDPE as the matrix, contaminated with minor fractions of polypropylene (PP), PET, and polyurethane (PU). The reprocessed material exhibited a single melting peak at 132 °C and a melt flow rate (MFR) of 9.9 ± 0.6 g 10 min−1, indicative of moderate degradation. Mechanical testing revealed reduced tensile strength and elongation at break compared to virgin HDPE, indicating compositional heterogeneity and poor interfacial adhesion. Field emission scanning electron microscopy (FESEM) revealed dispersed inclusions and microvoids acting as stress concentrators, consistent with reduced ductility. Crucially, progressive reduction of back pressure during processing optimization was essential for stabilizing melt flow and minimizing shear-induced degradation. This adjustment enabled consistent mold filling despite the material’s variability. The results demonstrate that mixed HDPE waste can be successfully valorized for non-structural applications such as plastic lumber or pallets, providing a sustainable pathway for recycling heterogeneous streams without costly pre-treatment or compatibilization.
Vázquez et al. (2026) studied this question.