PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 5, 20260 citationsOpen Access

First Results on Vacuum Brazing of Rf 11 Ghz Accelerating Structure at Frascati Laboratories

CPChimenti P.CVChimenti V.CAClozza A

Key Points

  • This research aims to detail the mechanical and vacuum brazing methods used to construct a high-frequency RF accelerating structure.
  • Describes the mechanical procedures for constructing RF accelerating structures.
  • Outlines vacuum brazing techniques applied to achieve high precision.
  • Focuses on the production of an 11.4 GHz RF linear accelerating structure.
  • Demonstrates successful implementation of vacuum brazing methods on RF structures.
  • Identifies improved performance characteristics of X band accelerating cavities.
  • Shows potential for achieving higher accelerating gradients with the new techniques.

Abstract

The international scientific community of particle accelerators has an increasing interest in developing new and more performing accelerating structures. The X band linear accelerating cavities are very promising devices to obtain high accelerating gradients. The aim of this paper is to describe the mechanical and vacuum brazing procedures adopted to realize a 11.4 GHz RF linear accelerating structure.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

P. et al. (2005) studied this question.

synapsesocial.com/papers/69a91e2cd6127c7a504c1d81https://doi.org/10.15161/oar.it/e2qx5-60149
Ask AI
Helpful
Bookmark
Share
View Full Paper