Biomass is a key trait in pasture plant breeding and agronomy, but measuring Dry Matter Yield or Fresh Weight across large numbers of samples is labour intensive and costly. Efficient biomass assessment systems must balance accuracy, speed, and cost, while ideally enabling non-destructive measurements. We developed a rapid, real-time, non-destructive, and remotely controlled LiDAR-based platform to estimate biomass in grass monocultures by measuring sward height at high spatial resolution. The system operates under ambient light conditions at a ground speed of 2.7 km per hour. It was evaluated in small-plot perennial ryegrass trials at two field sites in New Zealand, across two seasons at site A and one season at site B. At site A, correlations between LiDAR-derived height and fresh weight ranged from 0.33 to 0.74 across individual measurement cycles, with an overall multilevel R² of 0.72. At site B, the multilevel correlation increased to R² = 0.88. Weekly LiDAR scans at site B were used to estimate plot-level growth rates for 60 plots, demonstrating improved temporal resolution. Statistically significant differences in growth rate within regrowth cycles were detected among plots. The platform reliably differentiates perennial ryegrass plots based on biomass and offers higher temporal resolution than traditional methods.
Ghamkhar et al. (2026) studied this question.