To better address the operational requirements for emergency underwater ship maintenance, this study proposes the use of an underwater robotic arm instead of divers for cleaning submerged hull sections. Experimental analyses are conducted to validate the stability and feasibility of the constructed underwater robotic arm cleaning system. Initially, hydrodynamic analysis of the robotic arm was performed using the Morison equation. Through fluent dynamic simulations, the hydrodynamic moments on each robotic arm during cleaning operations were obtained, confirming that stress under typical seawater flow velocities remained within the rated limits. Subsequently, dynamic simulations were carried out to determine the joint driving torques in a fluid environment, quantify the influence of the hydrodynamic resistance on the joint torque, and verify the accuracy of the fluid dynamics model. Finally, motion control and underwater cleaning experiments were implemented on the system. Experimental results further corroborated the correctness of the fluid model and operational environment analysis, demonstrating the expected cleaning performance and providing both data and experimental support for practical underwater maintenance during long-distance ship voyages.
Cao et al. (2026) studied this question.