What question did this study set out to answer?

The aim is to develop and analyze composite ceramics from specific materials within a Na2O–CaO–SiO2–P2O5 system.

Composite Ceramics Based on NaCaPO4 and Na4Ca4Si6O18

View Full Paper

Ask AI

Bookmark

Authors

Develops resorbable ceramic materials for bone defects, indicating potential clinical applications in tissue engineering.

The aim is to develop and analyze composite ceramics from specific materials within a Na2O–CaO–SiO2–P2O5 system.
Utilized powder mixture of tricalcium phosphate and sodium metasilicate pentahydrate in a 4:6 molar ratio.
Fired ceramic mixtures in temperature range of 800–1100°C.
Analyzed phase composition and functional properties, including compressive strength and porosity.
Achieved compressive strength up to 19 MPa and porosity up to 55% at 500°C.
Temperature increase to 1100°C resulted in twofold increase in compressive strength and 10% decrease in porosity.
The materials were identified as suitable for bone tissue defect treatment.

Kaimonov et al. (2026) studied this question.

View Full Paper

Ask AI

Bookmark

View Full Paper

Ask AI

Bookmark

Authors

Develops resorbable ceramic materials for bone defects, indicating potential clinical applications in tissue engineering.

The aim is to develop and analyze composite ceramics from specific materials within a Na2O–CaO–SiO2–P2O5 system.
Utilized powder mixture of tricalcium phosphate and sodium metasilicate pentahydrate in a 4:6 molar ratio.
Fired ceramic mixtures in temperature range of 800–1100°C.
Analyzed phase composition and functional properties, including compressive strength and porosity.
Achieved compressive strength up to 19 MPa and porosity up to 55% at 500°C.
Temperature increase to 1100°C resulted in twofold increase in compressive strength and 10% decrease in porosity.
The materials were identified as suitable for bone tissue defect treatment.

Kaimonov et al. (2026) studied this question.

View Full Paper

Ask AI

Bookmark