PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
September 12, 2013Advanced Materials1,139 citations

A Flexible and Highly Pressure‐Sensitive Graphene–Polyurethane Sponge Based on Fractured Microstructure Design

View Full Paper
HYHong‐Bin YaoGJGe JinCWChangfeng Wang

Key Points

Key points are not available for this paper at this time.

Abstract

A fractured microstructure design: A new type of piezoresistive sensor with ultra-high-pressure sensitivity (0.26 kPa(-1) ) in low pressure range (<2 kPa) and minimum detectable pressure of 9 Pa has been fabricated using a fractured microstructure design in a graphene-nanosheet-wrapped polyurethane (PU) sponge. This low-cost and easily scalable graphene-wrapped PU sponge pressure sensor has potential application in high-spatial-resolution, artificial skin without complex nanostructure design.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Yao et al. (2013) studied this question.

synapsesocial.com/papers/69dbba6ecebd5668188359a8https://doi.org/10.1002/adma.201303041
Ask AI
Helpful
Bookmark
Share
View Full Paper

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Pressure sensor from a PVDF film2007 · 373 citations
  2. 2Soft, Highly Conductive Nanotube Sponges and Composites with Controlled Compressibility2010 · 241 citations
  3. 3Electric Field Effect in Atomically Thin Carbon Films2004 · 66,764 citations
  4. 4High-Performance Nanostructured Supercapacitors on a Sponge2011 · 717 citations
  5. 5Surface-micromachined capacitive differential pressure sensor with lithographically defined silicon diaphragm1996 · 79 citations