Key points are not available for this paper at this time.
Summary In this research, seismic performance of composite steel plate shear walls (CSPSWs) using high performance fiber reinforced concrete (HPFRC) panels is experimentally and numerically investigated. Three one‐story one‐bay CSPSW specimens using precast HPFRC panels were designed and fabricated for cyclic quasi‐static experiments. The HPFRC panels of composite shear wall specimens did not have any steel rebars. The main purpose of the study was to understand the effects of rigid and semirigid HPFRC panels on the seismic behavior of the system. Shear capacity, ultimate shear strength, lateral stiffness, energy dissipation, and ductility ratios of the specimens are evaluated. The experimental results demonstrate that specimens were able to resist lateral load up to at least interstory drift of 6%. Using HPFRC panels, CSPSW specimens becomes stiffer in the elastic region, and the yield displacement of the shear wall is decreased; therefore, the ductility ratio of the system is increased. It should be noted that ultimate shear strength, initial elastic stiffness, and energy absorption of specimens with an HPFRC panel on one side or both sides of the infill steel plate were approximately the same. However, using two HPFRC panels is not economical in comparison with CSPSW with an HPFRC panel on one side. Additionally, the second panel increases the seismic mass of the structure.
Ayazi et al. (2019) studied this question.