PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
March 11, 2008Advanced Functional Materials379 citations

A Morphological Model for the Solvent‐Enhanced Conductivity of PEDOT:PSS Thin Films

View Full Paper
ANAlexandre M. NardesRJRené A. J. JanssenMKMartijn Kemerink

Key Points

Key points are not available for this paper at this time.

Abstract

Abstract The well‐known enhanced conductivity of poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) thin films that is obtained by addition of high‐boiling solvents like sorbitol to the aqueous dispersion used for film deposition is shown to be associated with a rearrangement of PEDOT‐rich clusters into elongated domains, as evidenced from STM and AFM. Consistently, temperature dependent conductivity measurements for sorbitol‐treated films reveal that charge transport occurs via quasi 1D variable range hopping (VRH), in contrast to 3D VRH for untreated PEDOT:PSS films. The typical hopping distance of 60–90 nm, extracted from the conductivity measurements is consistent with hopping between the 30–40 nm sized grains observed with scanning probe microscopy.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Nardes et al. (2008) studied this question.

synapsesocial.com/papers/69de9b2d57c7c8340a558cechttps://doi.org/10.1002/adfm.200700796
Ask AI
Helpful
Bookmark
Share
View Full Paper