Intelligent Data-Driven Fuzzy Logic Control for Demand-Responsive Operation of Hybrid Geothermal Heat Pump Systems

Internal thermal load fluctuations and variations in occupant density affect the performance of Hybrid Geothermal Heat Pump (HGHP) systems. Traditional control strategies cannot provide the rapid adjustments needed to operate efficiently in real time and can be inefficient, leading to increased energy consumption and reduced thermal comfort. A data-driven fuzzy logic control framework is developed in this paper to dynamically adjust the performance of an HGHP system in real time as a function of occupancy and environmental conditions (e.g., temperature and humidity differences). The controller analyzes input data related to real-time outdoor ambient conditions like temperature, humidity and occupied spaces; a real-time flow sensor attached to the occupants of the building (a count of the number of occupants currently in each occupied space); and the coefficient of performance (COP) of the HGHP system, and uses the analysis to generate a “smart” control decision for the following device types: variable speed drive (VSD), fan number, operating modes, system control and valve positions. The controller also controls the overall system. The model was developed and simulated in MATLAB Simulink®, with realistic system parameters, and validated and calibrated using operational data from an HGHP system at a university, based on operating conditions. The simulation results indicate that our fuzzy controller achieves higher energy efficiency for thermal comfort than traditional thermostat-based controls, with COP improvements ranging from 7.36% to 11.76% and power consumption reductions between 4.13% and 8.55% across various occupancy scenarios. The improved COP also demonstrates the device’s responsiveness and effectiveness, even under frequent changes in occupancy patterns (dynamic occupancy), making it suitable for use in automated climate control systems in modern buildings.