Vicarious calibration is a technique that makes use of radiometrically stable targets such as dry lakebeds, desert sites, and open grasslands for the post-launch calibration of a satellite sensor. Top-of-the-atmosphere radiances or reflectances are provided from those sites for the calibration of a sensor. The reflectance of a remote sensing vicarious calibration site is measured by ratioing the signal from a ground target to the signal from a reference target, often a white panel made of PTFE whose reflectance is known. When physically mapping a vicarious calibration site prior to a satellite sensor overflight, there can be elapsed times between the two measurements as great as 10 min. The solar illumination can vary on time scales relevant to the time between measurements of a ground target and a reference panel, impacting the variance in the measured reflectance. In this work, we explore the impact of a temporal delay between two measurements taken outdoors on the Type A uncertainties in their ratios. A factor of 3 reduction in the Coefficient of Variation of the ratio taken simultaneously versus sequentially with delays on the order of 10 min was realized. Implications for protocols employed to measure the surface reflectance at sites used for the vicarious calibration of aircraft and satellite sensors are discussed.
Brown et al. (2026) studied this question.