PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
June 10, 2011IEEE Transactions on Industrial Electronics535 citations

A Switched-Capacitor Inverter Using Series/Parallel Conversion With Inductive Load

View Full Paper
YHYouhei HinagoHKHirotaka Koizumi

Key Points

Key points are not available for this paper at this time.

Abstract

A novel switched-capacitor inverter is proposed. The proposed inverter outputs larger voltage than the input voltage by switching the capacitors in series and in parallel. The maximum output voltage is determined by the number of the capacitors. The proposed inverter, which does not need any inductors, can be smaller than a conventional two-stage unit which consists of a boost converter and an inverter bridge. Its output harmonics are reduced compared to a conventional voltage source single phase full bridge inverter. In this paper, the circuit configuration, the theoretical operation, the simulation results with MATLAB/SIMULINK, and the experimental results are shown. The experimental results accorded with the theoretical calculation and the simulation results.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Hinago et al. (2011) studied this question.

synapsesocial.com/papers/69ffb50a581c6e761e7786b1https://doi.org/10.1109/tie.2011.2158768
Ask AI
Helpful
Bookmark
Share
View Full Paper