Key points are not available for this paper at this time.
Abstract A series of sulfonated Zr-MCM-41 samples were synthesized by the in-situ method followed by sulfonation using sulfuric acid for the catalytic study of cellulose to 5-hydroxymethyl furfural in batch condition. All synthesized catalysts were characterized by XRD, N 2 adsorption–desorption isotherm, FT-IR, TEM, EDX, and NH 3 temperature-programmed desorption analysis. The XRD and N 2 adsorption–desorption isotherm results have confirmed that incorporated Zr 4+ was substituted within the framework of silica MCM-41 with hexagonal pores. Similarly, the FT-IR and EDX results have proved that Zr-MCM-41 was sulfonated. The Brønsted acidic and Lewis acidic sites were identified by NH 3 -TPD analysis. Among the sulfonated Zr-MCM-41 catalysts, S-15Zr-MCM-41 has shown 70% cellulose conversion with 16.4% selectivity of 5-hydroxymethyl furfural at 170 °C for 2 h which was higher than other catalysts. It was attributed to the high ratio of Brønsted acidic to Lewis acidic sites. Graphic abstract
Phạm et al. (2020) studied this question.