PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
July 16, 2002Medical Physics141 citations

Pulsed‐microwave‐induced thermoacoustic tomography: Filtered backprojection in a circular measurement configuration

View Full Paper
MXMinghua XuLWLihong V. Wang

Key Points

Key points are not available for this paper at this time.

Abstract

Our study on pulsed-microwave-induced thermoacoustic tomography in biological tissues is presented. A filtered backprojection algorithm based on rigorous theory is used to reconstruct the cross-sectional image from a thermoacoustic measurement in a circular configuration that encloses the sample under study. Specific details describing the measurement of thermoacoustic waves and the implementation of the reconstruction algorithm are discussed. A two-dimensional (2D) phantom sample with 2 mm features can be imaged faithfully. Through numerical simulation, the full width half-maximum (FWHM) of the point-spread function (PSF) is calculated to estimate the spatial resolution. The results demonstrate that the circular measurement configuration combined with the filtered backprojection method is a promising technique for detecting small tumors buried in biological tissues by utilizing microwave absorption contrast and ultrasound spatial resolution (approximately mm).

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Xu et al. (2002) studied this question.

synapsesocial.com/papers/6a07e884c3448d68e5378405https://doi.org/10.1118/1.1493778
Ask AI
Helpful
Bookmark
Share
View Full Paper