Key points are not available for this paper at this time.
Abstract To achieve high performed zinc metal batteries, it is imperative to address the issues of dendrite growth and the side‐reactions occurring at the Zn anode, particularly when the batteries are operated at high current densities and high temperature. Herein, a flexible and dendrite‐free Zn metal anode (AgNPs@CC/Zn), which is prepared by inkjet printing silver nanoparticles on a 3D carbon matrix, is reported. Experimental observations and DFT calculation reveal that the Ag nanoparticles can work as heterometallic seeds for zinc deposition, and thus simultaneously improve the zincophilicity and thermal conductivity of the carbon matrix. This not only lowers the Zn nucleation overpotential and guides the uniform Zn nucleation but also promotes the reversible zinc stripping/plating via AgZn alloying/de‐alloying reactions. As a result, the AgNPs@CC/Zn anode presents low voltage hysteresis of 80 mV and superior cycling over 480 h at a high current density of 10 mA cm −2 . The AgNPs@CC/Zn anode can enable full cells with exceptional cyclic stability and enhanced high‐temperature endurance. Furthermore, the foldable pouch cell using the AgNPs@CC/Zn anode exhibits high capacity retention regardless of different deformation status. This work demonstrates the promising potential of inkjet printing technology in developing 3D dendrite‐free zinc anode for foldable and heat‐resistant zinc batteries.
Chen et al. (2021) studied this question.