PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
May 28, 2026Kinetics and Catalysis1 citations

Kinetics of Thermal Decomposition of Calcium Carbonate under Nonisothermal Conditions

View Full Paper
SVS. V. Vasilevich

Key Points

  • This research aims to investigate the kinetic aspects of thermal decomposition of calcium carbonate when subjected to varying heating rates.
  • Conducted a kinetic study of calcium carbonate's thermal decomposition at 1273 K with heating rates of 1.25 to 20 K/min.
  • Used the integral method and the Coats–Redfern method to analyze reaction mechanisms and determine macrokinetic parameters.
  • Developed equations to calculate reaction rate constants based on the integral data processing method.
  • Established a correlation between heating rate and activation energy, showing a strong dependence on CO2 concentration.
  • Achieved accurate calculations of conversion degrees with a standard deviation of <4.1% from experimental data using the proposed methods.

Abstract

The paper presents the results of a kinetic study of the thermal decomposition of calcium carbonate under conditions of continuous heating to a temperature of 1273 K at a constant rate of 1.25, 2.5, 5, 10, and 20 K/min. The integral method and the Coats–Redfern method were used to describe the reaction mechanism and determine the macrokinetic parameters. Experimental dependences of the logarithm of the preexponential factor on the activation energy were obtained. The dependences of the activation energy and preexponential factor on the heating rate are shown. The effect of the heating rate of calcium carbonate on the activation energy can be explained by the relationship between the heating rate and the concentration of CO2. Equations are proposed for calculating the reaction rate constant using the integral data processing method and the Coats–Redfern method. It has been demonstrated that the integral method and the Coats–Redfern method allow one to calculate the macrokinetic parameters of the thermal decomposition of calcite with comparable accuracy and taking into account the heating rate in these calculations makes it possible to obtain calculated values of the degree of conversion, the standard deviation of which from the experimental data is <4.1%.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

S. V. Vasilevich (2026) studied this question.

synapsesocial.com/papers/6a17dd4e3fad632b0f9d9fc6https://doi.org/10.1134/s0023158425601032
Ask AI
Helpful
Bookmark
Share
View Full Paper