PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
June 3, 2026Japanese Geotechnical Journal0 citationsOpen Access

A new method for determining the appropriate analytical interval based on recovery test results in pumping tests

TKTetsuyoshi KUBOTAYSYoshihide SHINSHIHKHaruto KAMEO

Key Points

  • This research aims to propose a new method for accurately calculating hydraulic conductivity during recovery tests in pumping tests.
  • Proposed a novel determination method for analytical intervals based on recovery test data.
  • Considered actual conditions such as steady state and well storage in the analysis.
  • Conducted a comparative analysis with conventional methods to identify discrepancies.
  • Found that the new analytical method yields more accurate hydraulic conductivity estimates compared to traditional methods.
  • Demonstrated improved efficiency by reducing required testing time prior to equilibrium levels.
  • Indicated that the proposed method can mitigate data discrepancies caused by real conditions.

Abstract

透水量係数や貯留係数を把握するための原位置透水試験の一つである揚水試験は,段階揚水試験を行った後,定流量揚水試験,回復試験を連続して実施する。地盤工学会基準における回復試験では,揚水井あるいは各観測井の水位が平衡水位まで回復した時点で試験を終了すると定められており,これが試験に時間を要する原因の一つとなっている。また,井戸貯留や定常状態などの実条件を考慮しない従来の解析方法では,それらの影響を受けたデータから透水量係数を算出する際に,計算結果に乖離があることも指摘されている。そこで本研究では,回復試験から透水量係数を算出する方法において,実条件を考慮しつつ,平衡水位まで回復する前に適切に透水量係数を算出できる解析区間に関する新たな判定方法を提案した。

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

KUBOTA et al. (2026) studied this question.

synapsesocial.com/papers/6a1fc40fdee9eb8c0dce59efhttps://doi.org/10.3208/jgs.21.191
Ask AI
Helpful
Bookmark
Share
View Full Paper