PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
June 3, 2026Russian Engineering Research1 citations

Extrusion of a Rod with a Square Cross Section from a Cylindrical Workpiece. Determination of the Kinematic and Stress States

View Full Paper
AVA.L. VorontsovSKS. M. Karpov

Key Points

  • The research aims to derive equations for calculating stresses and force during the extrusion of square sections from a cylindrical workpiece.
  • Developed expressions based on the theory of plastic flow.
  • Applied calculations for stresses and force parameters during extrusion.
  • Focused on the extrusion of square cross sections from cylindrical billets.
  • Analytical expressions for stresses were derived.
  • Force parameters were systematically calculated and documented.
  • Findings enhance understanding of the extrusion process mechanics.

Abstract

Based on the theory of plastic flow, expressions are obtained for calculation of stresses and force parameters during the extrusion process and pressing of square sections from a cylindrical billet.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Vorontsov et al. (2026) studied this question.

synapsesocial.com/papers/6a1fc6f7dee9eb8c0dce7d99https://doi.org/10.3103/s1068798x26700383
Ask AI
Helpful
Bookmark
Share
View Full Paper

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

  1. 1Extrusion of solid stepped products with cylindrical section passing into section of square cross-section. Determination of kinematic and stress states. Part 22023
  2. 2Extrusion of solid stepped products with cylindrical section passing into section of square cross-section. Problem statement. Part 12023
  3. 3Extrusion of solid stepped products with cylindrical section passing into section of square cross-section. Experimental check of obtained theoretical results. Part 42023
  4. 4Creation of internal protrusion in pipe billet by radial extrusion. Determination of kinematic and stress states. Part 22025
  5. 5Theoretical studies of reverse extrusion process of thick-walled tube billet by punch with flat working surface2025