Low-cost and portable analytical devices are increasingly relevant for decentralized measurements, in situ monitoring, and educational applications. This study presents the design, construction, and validation of a low-cost, portable colorimeter for the indirect determination of ethanol in aqueous solutions via dichromate oxidation. Built with accessible components, including an Arduino microcontroller, an RGB LED, and a light-dependent resistor (LDR) photodetector, the device provides a simple open-hardware platform for visible-range colorimetric measurements without the need for optical filters. Ethanol concentration is determined through oxidation in an acidic medium, generating an optical response proportional to the analyte concentration. Data processing is performed using open-source Python scripts combined with Gaussian fitting for signal extraction and calibration. The main novelty of the system lies in integrating simplified optical components, open-hardware architecture, and computational signal processing to obtain reliable analytical responses in a portable, accessible format. The device’s performance was compared with a commercial UV–Vis spectrophotometer, showing linear behavior over 0.5–1.5% (v/v) ethanol (R2 = 0.99) and relative errors below 11% for beverage samples. These results demonstrate that the proposed system is a reliable and cost-effective alternative for rapid ethanol analysis in relatively simple alcoholic matrices.
Schnepper et al. (2026) studied this question.