PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
April 1, 2007366 citations

Health Monitoring of Civil Infrastructures Using Wireless Sensor Networks

View Full Paper
SKSukun KimSPShamim N. PakzadDCDavid Culler

Key Points

Key points are not available for this paper at this time.

Abstract

A Wireless Sensor Network (WSN) for Structural Health Monitoring (SHM) is designed, implemented, deployed and tested on the 4200 ft long main span and the south tower of the Golden Gate Bridge (GGB). Ambient structural vibrations are reliably measured at a low cost and without interfering with the operation of the bridge. Requirements that SHM imposes on WSN are identified and new solutions to meet these requirements are proposed and implemented. In the GGB deployment, 64 nodes are distributed over the main span and the tower, collecting ambient vibrations synchronously at 1 kHz rate, with less than 10 mus jitter, and with an accuracy of 30 muG. The sampled data is collected reliably over a 46-hop network, with a bandwidth of 441 B/s at the 46th hop. The collected data agrees with theoretical models and previous studies of the bridge. The deployment is the largest WSN for SHM.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Kim et al. (2007) studied this question.

synapsesocial.com/papers/6a2280df3e33ec07c66cc67bhttps://doi.org/10.1109/ipsn.2007.4379685
Ask AI
Helpful
Bookmark
Share
View Full Paper